MENU SERVICE KODE TV

MENU SERVICE CODE or "SERVICE MODE" is a numeric code or letter
or a combination of both .. this way is used to setting tv to return to normal .. Another way is to use a hardware trick by shorted/jumper moment at the point / or antecedent switches provide (Sharp, Panasonic, Thomson, phillips etc.).
here I will give you several ways / code to open the service menu of some brands of TV set, general circulate in Indonesian tv output .. of course the aircraft beginning in 2000/01 to the present, as most manufacturers only modify its course



TOSHIBA: PRESS MUTE IN ONE REMOTE, THEN AGAIN CLICK AND HOLD THE MENU + MUTE TV. Repeat PROCESS FOR THE NEXT
PUSH-PUSH MENU NUMBERS 4,7,2,5 in remote
PRESS VOL (-) IN TV-PRESS AND HOLD NUMBER 9



SANYO : MENU IN REMOTE + VOLUME UP TV


LG FLATRON:PRESS OK DIREMOTE + OK IN TV or MENU REMOTE + MENU IN TV



TCL : PRESS DISPLAY (OSD) in REMOTE + VOLUME DOWN in TV ,hold 3 sec


PHILLIPS : POSISI TV STNDBY,PRESS 0,6,2,5,9,MENU


POLYTRON: standby TV POSITION, PRESS AND HOLD MENU ON REMOTE TO TV ON THE INPUT CODE NUMBERS 1013.

PANASONIC: SHORT (connect time) PIN 'FA-1' TO 'FA-2' OR TP-8 TO GROUND
PANASONIC TX SERIES: PRESS VOL (-) + in TV OSD



SHARP: SHORT LEGS (PIN) 6 PIN 7 AND a moment upon the IC MCU (TDA 98XXX). SHORTED BACK TO EXIT

SHARP EXPRESSION: CONNECT THE TWO WIRE OR flops / jumper J800 (near TUNER) PCB D-HOLE HAS PROVIDED AND TWO PARALLEL JUMPER.

CRYSTAL: POSITION TV standby, CLICK VOLUME UP + DOWN VOLIME SIMULTANEOUSLY ON TV AND HOLD ON TV until tv on

.


AKARI: PRESS SLEEP in REMOTE + MENU TV



SAMSUNG: CLICK ON STANDBY REMOTE POSITION: MENU - PSTD - MUTE - POWER ON
SAMSUNG Plano: STANDBY POSITION, PRESS THE REMOTE: DISPLAY-MENU-MUTE-POWER ON
Plano DIGITAL SAMSUNG HD100: STANDBY-DISPLAY-MENU-MUTE-POWER
OR: STANDBY-MUTE-1-8-2-POWER ON








.
AKIRA, FUJITEC, Boomba:
BRAND CHINA AND SOME ARE USING OTHER D SERIES LC8632XX IC PROGRAM TYPE: PRESS MENU ON REMOTE twice - RECALL (Q. VIEW) - MUTE.

OTHER CHINA TV (KCL, MITOCHIBA, BAZZOMBA) PUSH UP VOLUME ON TV ONCE NOL.TEKAN RECCAL IN REMOTE, PRESS AND HOLD VOLUME (-) IN TV SIMULTANEOUSLY WITH PUSH BACK IN REMOTE RECALL .. the process is repeated for the next go to sub menu up to the position of exit service menu.



AIWA: serve MENU BUTTON IS IN REMOTE IN THE VOLUME BUTTON (+), unloading NOTICE.


JVC: SIMULTANEOUSLY PRESS AND HOLD the MUTE OSD +
PRESS AND HOLD OR PICTURE + OSD


HITACHI: PRESS AND HOLD BUTTON Av in TV, POWER SWITCH ON TV


SONY : STANDBY- OSD - 5 - VOL(-) - POWER ON


RCA / THOMSON: PRESS AND HOLD IN BUTTON VT + TV POWER SWITCH ON TV

1 comment: